Learning and Development Director - Qatar

Urgently needed for a company in Qatar: Learning and Development Director. Interested candidates are requested to send CVs to sheila.lorenzo@ppldynamics.com

Procurement and Administration Director - Qatar

Urgently looking for Procurement and Administration Director for a company in Qatar from the Healthcare industry. Interested candidates, please send CVs ASAP to sheila.lorenzo@ppldynamics.com

Sales Person - Dubai

Are you a sales person looking to step into an exciting new career path, Both my Dubai and Qatar offices are looking for sales people with a desire to succeed.

No recruitment experience is necessary just the will and desire to succeed. 

Please email your cv to Bernard.ward@reedglobal.com.

Senior HR Manager - Qatar

Urgently searching for Senior HR Manager for MNC in Qatar.

Must have knowledge with "Qatar Labor Laws". ]

Min 10yrs experience including 5yrs in Management Level and must have background in Construction Industry.. Please inbox/contact me: ruth.tiu@nd-associates.com / +97144504190

Quality Control Supervisor Manager - Qatar

We have requirement of below mentioned categories for Qatar. Ø 

RECEPTIONIST - 2 candidates - Male - 

Salary QR 1500 – QR 1600 - To work in Hotel Ø 

QUALITY CONTROL SUPERVISOR/MANAGER (for Hygiene and Sanitation) - 

Responsible for a compliance to any legal requirements and policy on Food and safety. - Evaluating/creating/implementing programs and policies. - 

Conduct Trainings and Seminar - 

Salary based on experience Regards Deepa Karmachandani 

deepa@careerstepltd.com

Planning Manager - Qatar

Immediately Required - Planning Manager to be based in Qatar. 

Engineering Graduate preferably Civil with 15+ years of Planning experience out of that at least 2 years experience as Planning Manager. 

Interested candidate may send their CVs to : 

syed.yusuf@parsons.com

Managers-Internal Audit - Qatar

Hiring for Managers-Internal Audit and Risk with a Leading Consulting firm for Qatar location.

CA or MBA Finance with 5+ years of post qualification experience may apply. Interested people kindly forward your CV to jinita@populusglobal.com

Five Stars Hotels in QATAR

For Five Stars Hotels in QATAR need to hire the following
For all Males & Females 
1. Host, Hostess 
2. Waiter, Waitresses
3. VIP Guest Relation
Please if you are interested send me your updated CV with recent photo to: CV@forbusinesseg.com

Banking Desk - Qatar

Reed Banking in Qatar are growing once more… 

If you presently work a banking desk in the MENA region then please send your cv in confidence to Bernard.ward@reedglobal.com

International Jobs - Doha, Qatar

TAX FREE SALARY!! Our Client here in Doha, Qatar is urgently looking for a DESIGN MANAGER. - Western Educated - university degree holder. - Minimum 10 years experience in design of Port Special Systems. - Should have Middle East experience - English & Arabic Speaker. KINDLY EMAIL YOUR RESUME TO joseph.sanjuan@reedglobal.com at the earliest.

HR Manager - Qatar

Our client a leading Multinational Construction and Engineering company dealing in MEP/Oil & gas/Infrastructure development projects based in GCC requires HR Manager for Qatar. 

HR MANAGER-QATAR MBA-HR ,with 10-15 years of hardcore HR experience in Construction company, required for our client in Qatar. 

Will be responsible for Planning , developing , coordinating and supervising HR functions, policies and programs as related to all assigned employee groups as authorized by corporate dictate.

Salary: AED 30K-35K (Gross) Interested candidates can send CV at: info@careerlinedubai.com

Accountants - Dubai

Accountants Required for Dubai, Doha, Qatar

Job Summary 

 Responsibilities and Reporting:

• As the senior accountant, you will report directly to the Managing Director of the Company, and be responsible for managing and taking responsibility for key client accounts.

• The Senior Accountant is responsible for completing the client accounting requirements including handling creditors, debtors, payroll, bank reconciliation and balance sheet schedules. Some administration and HR related tasks may also be required.

• Additional tasks include preparing client monthly financial reports, which involve liaising with clients to gather data and provide feedback to them.

• Prepare cash flow and income statement forecasts

• Assist clients by preparing their annual budgets.

• Address client queries relating to their accounts.

• Take on the role as a business advisor to clients, by providing them with suggestions and recommendations on how they can better manage the financial aspects of their business: optimization of costs, improving cash flow, improve systems and processes, and identifying strong and weak performing segments of their business. 

• Attend client meetings as required, including board meetings as a representative of the company.

• Ability to take on project related consultancy work such as business plans, policies and procedures and internal reviews.

•    Performs monthly analysis on vendor payments to ensure payments were received and processed, as well as identify causes of late payments and/or lost discounts 

•    Ensures that all payments are paid timely and critical payments are appropriately managed 

•    Establishes and supports a set of core accounts payable metrics for monitoring and communicating levels of performance 

•    Assists with analyzing recurring issues to help identify process improvements 

•    Reviews periodically accounts payable internal controls to ensure compliance 

•    Maintains all accounts payable files and answers vendor inquires 

•    Processes invoices and posts information to appropriate accounting ledgers 

•    Develops and runs reports on a frequent basis 

•    Assists in managing accounts payable implementation projects and tasks

Desired Skills and Experience

- You must be a qualified Chartered Accountant, with a minimum of 5 years. You must have worked for a large International, Regional position. You must have excellent communication and relationship management skills, as dealing with senior internal and external stakeholders is a key part to the role. You must have regional experience and ideally be based in the UAE. 

Requirements 

Education and Qualifications

• Graduate Degree in Finance & Accounting

• Postgraduate qualification preferred

• Chartered Accountant Accreditation (ACCA, CPA, CA). 

• Track record of developing and implementing robust governance culture.

• Track record of managing tight cash control environment.

• Good command of English

• Knowledge of large scale infrastructure project investments

• Knowledge of contracting environment

• Knowledge of complex financial structuring and large scale debt structures preferred

• People Management skills

• Arabic language will be an added advantage

Please send your resume at  asad.noman.uk@gmail.com  with cover letter and expected salary.

Please note, due to a high number of applicants, only successful candidates will be contacted.

Urgently Required Professional Engineers For Qatar Fertilizer Company (QAFCO).

No of Positions :

1) Condition Monitoring Engineer 2) Mechanical Projects Engineer – Static Equipment 3) Mechanical Projects Engineer – Rotating Equipment  4) Electrical Projects Engineer 5) Instrument Projects Engineer 6) Instrument Designer 7) Civil Project Engineer 8) Process Safety Engineer 9) Process Projects Engineer 1. CONDITION MONITORING ENGINEER This position is responsible for monitoring rotating equipment machinery condition for impending faults, heavily orientated towards solving machinery problems through vibration data collection, analysis of data and identifying root causes. The successful candidate shall have the responsibility for recommending the most technically and commercially feasible corrective actions.Supervise a team of Condition Monitoring technicians and support their development in this specialised field. Provide specialist services to Projects and Field Maintenance on issues relating to machinery such as developing specifications, selection, design, modifications, vibration acceptance and performance testing. Provide technical support in the field of lube oil specifications, analysis and monitoring. Ensuring that all activities are carried out in compliance with QAFCO’s Occupational Health, Quality, Safety and Environment procedures. The candidate shall have the ability to communicate effectively in written and spoken English, operate standard PC Applications and have Technical Report Writing Skills. A Bachelor Degree in Mechanical Engineering from a recognized University followed by 10 years direct and relevant trade experience in Machinery Maintenance, Vibration Analysis and Condition Monitoring within the Oil & Gas, Fertilizer or Petrochemical Industry is required. 2. MECHANICAL PROJECT ENGINEER – Static Equipment Principle duties and responsibilities • To perform basic and detailed design engineering work on pressure vessels, heat exchangers, multi discipline packages, static equipment and piping in compliance with the Design Codes and Standards of ASME, API, TEMA.,BS. • Develop project data sheets, specifications, requests for quotations, evaluation of offers and follow up of equipment orders. • Follow up vendors for static equipment and multi discipline packages engineering and fabrication along with conducting expediting and inspection visits when required. • Follow up contractors and subcontractors within own discipline scope during engineering and construction phases in order to assure the quality and safety aspects of the work. • Perform engineering design and verification using PV ELLITE / CODEWARE • Perform in depth analysis and verification of 2D and 3D FEA models as per ASME VIII Div 2 Code. • Coordinate /manage and be part of the engineering and execution of multi discipline, multi scope Projects according to the Company Project Handling Procedures, including project planning, scheduling, Cost estimation and controls. • To perform execution and follow up activities of study & feasibility, engineering, detailed design work (calculations, specifications, Modeling / analysis of designed system / equipment), procurement (to create and follow up of purchase requisitions, purchase orders, tender documents, techno-commercial evaluations of bids, contracts.) . • Responsible to provide experienced level design and detail engineering while exhibiting efficient workflow performance. • Perform Nozzle load calculations with relevant standards. Perform flange sizing and thickness calculation with proper selection of gasket and bolts Perform/review strength calculations for pressure parts, skirts, saddles, leg supports etc. • Perform sizing calculations for pressure vessels / heat exchangers / columns like Air coolers, Filters and heaters, regenerators, absorber, HP Urea equipments. Sizing of air cooled, water cooled, finned tube, shell and tube type heat exchangers. • Proficient in carry out remaining life assessment of pressure vessels and Fitness for service based on API recommendations. • To Exhibit proficiency in executing quality design and engineering to all types of static equipment used in Company processing plants with minimal assistance • Providing a close watch on budgets and technical issues affecting quality And/or schedule together with supplying current and timely status reports on all project tasks assigned. • Prepare and coordinate for the documentation & drawings of the projects through in-house draftsmen or contractor. • Will conduct & participate in Safety Reviews, Job Safety Analysis, Tool Box Meeting and will have required knowledge of industrial Safety standards, practices & Safe Work Permit requirements, and comply with all relevant QAFCO Management System procedures in respect to Occupational Health, Quality, Safety and Environment Minimum Qualification, Experience: • Bachelors Degree in Mechanical Engineering Discipline. • A minimum of 8 years proven successful experience in engineering environment, designing and review of static equipment, piping and multi discipline package units within the Oil & Gas, Fertilizer or Petrochemical Industry. • Comprehensive knowledge of engineering codes and standards and their application with reference to stationary equipment and piping design. • Should have a very good English communication & Technical Report Writing Skills. • Good knowledge & ability to operate standard PC applications/ MS Office. • Very good knowledge in Metallurgy and Material selection along with corrosion and failure mechanism in oil & gas, fertilizer and petrochemical plants. Experience is use of ASTM standards is a must. • Good knowledge of welding procedures, welding qualifications, None Destructive Testing, according to the ASME Code. • Ability to work in a multi discipline, multi national environment. • Ability to work on multiple projects and tasks. • Ability to lead and be part of multi discipline teams. • Very well versed in using Autocad and electronic documentation procedures. 3. MECHANICAL PROJECT ENGINEER – Rotating Equipment Principle duties and responsibilities • To perform basic and detailed design engineering work on rotating equipment ( pumps ,compressors, turbines and all associated auxiliaries and components in compliance with the Design Codes and Standards of API and ISO. • Develop project data sheets, machinery selection with all auxiliaries, specifications, requests for quotations, evaluation of offers and follow up of equipment orders. • Follow up vendors for rotating equipment and multi discipline packages engineering and fabrication along with conducting expediting and inspection visits when required. • Follow up contractors and subcontractors within own discipline scope during engineering and construction phases in order to assure the quality and safety aspects of the work. • Perform engineering and verification of rotor dynamics, rotor stability, vibration analysis, rotating machinery compliance with the API and ISO Codes. • Perform engineering for rotating equipment sizing and selection. • Attend and evaluate machinery performance and mechanical running tests. • Coordinate /manage and be part of the engineering and execution of multi discipline, multi scope Projects according to the Company Project Handling Procedures, including project planning, scheduling, Cost estimation and controls. • To perform execution and follow up activities of study & feasibility, engineering, detailed design work (calculations, specifications, Modeling / analysis of designed system / equipment), procurement (to create and follow up of purchase requisitions, purchase orders, tender documents, techno-commercial evaluations of bids, contracts.) . • Responsible to provide experienced level design and detail engineering while exhibiting efficient workflow performance. • To Exhibit proficiency in executing quality design and engineering to all types of rotating equipment used in Company processing plants with minimal assistance • Providing a close watch on budgets and technical issues affecting quality And/or schedule together with supplying current and timely status reports on all project tasks assigned. • Prepare and coordinate for the documentation & drawings of the projects through in-house draftsmen or contractor. • Will conduct & participate in Safety Reviews, Job Safety Analysis, Tool Box Meeting and will have required knowledge of industrial Safety standards, practices & Safe Work Permit requirements, and comply with all relevant QAFCO Management System procedures in respect to Occupational Health, Quality, Safety and Environment Minimum Qualification, Experience: • Bachelors Degree in Mechanical Engineering Discipline. • A minimum of 8 years proven successful experience in engineering environment, designing and review of rotating machinery and multi discipline package units within the Oil & Gas, Fertilizer or Petrochemical Industry. • Comprehensive knowledge of engineering codes and standards and their application with reference to rotating equipment design. • Should have a very good English communication & Technical Report Writing Skills. • Good knowledge & ability to operate standard PC applications/ MS Office. • Good knowledge in Metallurgy and Material selection along with corrosion and failure mechanism in oil & gas, fertilizer and petrochemical plants. Experience is use of ASTM standards is a must. • Ability to work in a multi discipline, multi national environment. • Ability to work on multiple projects and tasks. • Ability to lead and be part of multi discipline teams. • Very well versed in using Autocad and electronic documentation procedures. 4. ELECTRICAL PROJECTS ENGINEER Principle duties and responsibilities • Perform basic and detailed electrical engineering works involving electrical sub-stations, power plant and power station, transformers, HV,MV&LV Switchboards, HV,MV&LV Motors (induction & synchronous), UPS, control panels & desks, PLC, fire alarm & siren system, VFDs, cables, SCADA & DCS interfaces with electrical equipment, cathodic protection etc. • Perform electrical design using software for carrying out the relay settings, relay coordination, equipment rating sizing. • Selection of PLCs, configuration, understanding of I/O logics and cross references as well as design aspects of PLC panels are required for project engineering work. • Evaluation, conducting and understanding of network load flow, short circuit, motor starting and co-ordination studies. Responsible to provide experienced level design and detail engineering while exhibiting efficient workflow performance. • To coordinate & perform Electrical project works (brown field modification, On-line, Shutdown, Greenfield etc.) evaluations of bids, contracts. • To perform execution and follow up activities of study & feasibility, engineering, detailed design work (calculations, specifications, Modeling / analysis of designed system / equipment), procurement (to create and follow up of purchase requisitions, purchase orders, tender documents, techno-commercial evaluations of bids, contracts.) • Follow up vendors for electrical equipment and multi discipline packages engineering and fabrication along with conducting expediting and inspection visits when required. • Inspection, construction, testing, livening up & commissioning activities and final documentation. The project types may range from minor field or complete unit related to major multi discipline projects involving teams of multi discipline personnel. • Coordinate /manage and be part of the engineering and execution of multi discipline Projects according to the Company Project Handling Procedures, including project planning, scheduling, Cost estimation and controls. • Follow up contractors and subcontractors within own discipline scope during engineering and construction phases in order to assure the quality and safety aspects of the work. • Providing a close watch on budgets and technical issues affecting quality And/or schedule together with supplying current and timely status reports on all project tasks assigned • Will conduct & participate in Safety Reviews, Job Safety Analysis, Tool Box Meeting and will have required knowledge of industrial Safety standards, practices & Safe Work Permit requirements, and comply with all relevant QAFCO Management System procedures in respect to Occupational Health, Quality, Safety and Environment, • Prepare and coordinate for the documentation & drawings of the projects through in-house draftsmen or contractor. Minimum Qualification, Experience: • Bachelor’s Degree in Electrical Engineering Discipline. • A minimum of 8 years proven successful experience in a relevant electrical engineering required field within the Oil & Gas, Fertilizer or Petrochemical Industry. • Comprehensive knowledge of engineering codes and standards and their application with reference to electrical equipment and electrical engineering. • Ability to work in a multi discipline, multi national environment. • Ability to work on multiple projects and tasks. • Ability to lead/manage and be part of multi discipline teams. • Should have a very good English communication & Technical Report Writing Skills. • Should have a very good knowledge & ability to operate standard PC applications/ MS Office. • Very well versed in using Autocad and electronic documentation procedures. 5. INSTRUMENT PROJECT ENGINEER Principle duties and responsibilities • To perform basic and detailed design engineering work on both field instrumentation ( control valves, analyzers, transmitters) and systems ( DCS,ESD,SCADA, ) including interface between both. and in between systems. • Perform details engineering and application of various international standards like IEC/ANSI/ISA/BS etc. • To Exhibit proficiency in executing quality design and engineering to all types of instrument equipment and systems ( DCS, ESD, ITCC, TRICONEX, Fire & Gas) used in Company processing plants with minimal assistance . • Perform details engineering on Fire and gas systems, interface of fire & gas systems with other systems ( HVAC, SCADA, DCS,ESD ) and related field instruments. • Perform engineering work using software such as instrucalc, flowel, conval, FEsizer • Develop project data sheets, specifications, requests for quotations, evaluation of offers and follow up of instrument equipment orders. • Follow up vendors for instrumentation equipment and multi discipline packages engineering and fabrication along with conducting expediting and inspection visits when required. • Follow up contractors and subcontractors within own discipline scope during engineering and construction phases in order to assure the quality and safety aspects of the work. • Coordinate /manage and be part of the engineering and execution of multi discipline, multi scope Projects according to the Company Project Handling Procedures, including project planning, scheduling, Cost estimation and controls. • To perform execution and follow up activities of study & feasibility, engineering, detailed design work (calculations, specifications, Modeling / analysis of designed system / equipment), procurement (to create and follow up of purchase requisitions, purchase orders, tender documents, techno-commercial evaluations of bids, contracts.) . • Responsible to provide experienced level design and detail engineering while exhibiting efficient workflow performance. . • Providing a close watch on budgets and technical issues affecting quality And/or schedule together with supplying current and timely status reports on all project tasks assigned. • Prepare and coordinate for the documentation & drawings of the projects through in-house draftsmen or contractor. • Will conduct & participate in Safety Reviews, Job Safety Analysis, Tool Box Meeting and will have required knowledge of industrial Safety standards, practices & Safe Work Permit requirements, and comply with all relevant QAFCO Management System procedures in respect to Occupational Health, Quality, Safety and Environment Minimum Qualification, Experience: • Bachelors Degree in relevant Engineering Discipline. • A minimum of 8 years proven successful experience in a relevant instrumentation and systems engineering required field within the Oil & Gas, Fertilizer or Petrochemical Industry. • Should have a very good knowledge & ability to operate standard PC applications/ MS Office. • Should have a very good English communication & Technical Report Writing Skills. • Knowledge of INTOOLs . • Ability to work in a multi discipline, multi national environment. • Ability to work on multiple projects and tasks. • Ability to lead/manage and be part of multi discipline teams. • Very well versed in using Autocad and electronic documentation procedures. 6. INSTRUMENT DESIGNER Principle duties and responsibilities • Independently be able to prepare the drawings like general arrangement drawings, Instrument index, cable schedules, Instrument location & Site layouts, Hook-up drawings, loop drawings, Schematic Drawings, Data Sheets, Cause & effect Matrix, Trip & Interlock schedules, Trip and alarm settings, Instrument air distribution, Junction box & interconnection wiring drawings, Power distribution drawings, System architecture drawings, System & marshalling cabinets and field junction-box layout drawings etc. • Work as document controller for the project activities. • Should be able to use online technical documentation systems and to search for and retrieve drawings, update revisions etc. • Filing and retrieving engineering drawings from the hard copy drawing Archives. • Should be able to use standard PC applications like MS Office, pdf reader and writer etc. Minimum Qualifications and Experience • The Candidate shall have Diploma in relevant engineering discipline, including draughting. • A minimum of 8 years direct and relevant Instrument trade experience as Draughtsman within fertilizer / oil & gas or petrochemical industry. • Very well versed in using Autocad and electronic documentation procedures. • Very good knowledge and experienced in use of INTOOLS (min. instrument index module, Datasheet module and wiring module) • Should have very English communication skills. 7. CIVIL PROJECT ENGINEER Principle duties and responsibilities • To perform basic and detailed design engineering work and analysis of steel structure and concrete works (foundations, buildings, concrete structures) in compliance with the Design Codes and Standards complete inclusive all required specifications and design for construction and execution. • Perform design and analysis using software STAAD-Pro, ETAB • Perform details design and loading of concrete foundation for heavy static and rotating equipment inclusive of complete specifications and design for construction and execution. • Perform building design and verification of design and calculation done by consultants. • Manage projects of complete buildings inclusive of HVAC including Fire & Gas Interface and system installation, Electrical systems, facilities, communication and network. • Develop project specifications, requests for quotations, evaluation of offers and follow up of equipment orders. • Follow up contractors and subcontractors within own discipline scope during engineering and construction phases in order to assure the quality and safety aspects of the work. • Coordinate /manage and be part of the engineering and execution of multi discipline, multi scope Projects according to the Company Project Handling Procedures, including project planning, scheduling, Cost estimation and controls. • To perform execution and follow up activities of study & feasibility, engineering, detailed design work (calculations, specifications, Modeling / analysis of designed system / equipment), procurement (to create and follow up of purchase requisitions, purchase orders, tender documents, techno-commercial evaluations of bids, contracts.) . • Responsible to provide experienced level design and detail civil engineering while exhibiting efficient workflow performance. • Providing a close watch on budgets and technical issues affecting quality And/or schedule together with supplying current and timely status reports on all project tasks assigned. • Prepare and coordinate for the documentation & drawings of the projects through in-house draftsmen or contractor. • Will conduct & participate in Safety Reviews, Job Safety Analysis, Tool Box Meeting and will have required knowledge of industrial Safety standards, practices & Safe Work Permit requirements, and comply with all relevant QAFCO Management System procedures in respect to Occupational Health, Quality, Safety and Environment Minimum Qualification, Experience: • Bachelors Degree in Civil Engineering Discipline. • A minimum of 8 years proven successful experience in engineering environment, designing and review of steel structure, concrete works and buildings within the Oil & Gas, Fertilizer or Petrochemical Industry. • Knowledge of explosion proof building design and associated HVAC system is an advantage. • Comprehensive knowledge of engineering codes and standards and their application with reference to steel structures, concrete, foundations and buildings • Should have a very good English communication & Technical Report Writing Skills. • Good knowledge & ability to operate standard PC applications/ MS Office. • Ability to work in a multi discipline, multi national environment. • Ability to work on multiple projects and tasks. 8. PROCESS SAFETY ENGINEER Principle duties and responsibilities • To plan & execute Process Safety & Risk Engineering studies for Projects including but not limited to HAZOP, SIL Classification, Hazardous Area Classification, QRA, Risk Assessment, Risk Analysis, Dispersion Studies, Process Safety Studies. • To assist or being responsible for analyzing, determining and ensuring optimum process safety measures are identified & implemented during various project phases. • Follow valid standards, technical requirements and good engineering practices to ensure that projects are executed in line with agreed on process safety specifications. • To provide specifications for the procurement of equipment and services. Conduct technical and commercial evaluation of bids and recommend preferred suppliers to ensure meeting optimum process safety requirements. • To plan work activities, and lead various project teams to ensure project safety activities are achieved within the set time schedules, specification and cost. • Follow up and control implementation of recommended safety measures. • Keep informed of technological developments and best practices in the area of responsibility in order to update knowledge, identify and recommend opportunities for increased effectiveness and/or cost reduction. • Train and guide the Project engineers in the field of Process Safety and ensure the Process engineers are capable of performing the full scope of process safety engineering and design. • Enhance the knowledge ad ability to perform safety analysis with all the project engineers of all disciplines. • Develop the Company Process Safety Specification and Standards to be sued in all projects. • Comply with all relevant QAFCO Management System procedures in respect to Occupational Health, Quality, Safety and Environment. Minimum Qualifications and Experience • Bachelors Degree in Chemical Engineering or others relevant engineering discipline. • A minimum of 8 years proven successful experience in a Process Safety field within fertilizer / oil & gas or petrochemical industry. • Extensive knowledge in all aspects of Process Safety Engineering implementation and execution based on International Standards. • Should have a very good knowledge & ability to operate standard PC applications/ MS Office. • Should have a very good English communication & Technical Report Writing Skills. 9. PROCESS PROJECTS ENGINEER The incumbent will be responsible for performing process related investigations including root cause analysis to problems, evaluate conceptual alternatives and propose a best solution. Furthermore the candidate will co-ordinate evaluations of proposed conceptual solutions by planning, cost estimating, performing technical calculations during basic engineering, preparing of specification and tender documents, and evaluating of bids during pre-projects. He will execute and report this work in a time and cost effective manner through good engineering practices including leading of Hazop studies. He must have a Bachelor Degree in Chemical Engineering, have simulation experience and be fully conversant in standard office packages. A minimum experience of 7 years as Process Project Engineer in projects related to ammonia / urea manufacturing plants. INSTRUCTIONS FOR SUBMISSION OF APPLICATION: 1. Please click on the link below for CV-FORM to be filled and attached to your application email. 2. Please email your application with attached CV-FORM to qafco@mackpak.com. 3. Please write the name of Position applied for in the Subject line of your email. 4. Send separate email with CV-FORM for each applied for position.

Qatar National Bank

Staff required for Qatar National Bank.

Experts from Customer Relation, IT, Finance, Accounts, Audit, Analysis, Budget control, HSE 

Plz apply at:

azawt@live.com Visit www.qnb.com.qa

 for job description

Junior Accountant - Qatar

JUNIOR ACCOUNTANT Required:

Sector: Construction 

Country: Qatar 

Education: B.Com, BBA 

Experience: 2 - 3 years 

J.D: Data entry, Account reconciliation,

Payroll etc.

Compensation: 3,000 - 4,000 QAR + Accommodation Visa limitations:

Paksitani nationals only (Drop CVs at: mqasimakbar@live.com)

Junior Accountant - Qatar

JUNIOR ACCOUNTANT Required: 

Sector: Construction 

Country: Qatar 

Education: B.Com, BBA 

Experience: 2 - 3 years 

J.D: Data entry, Account reconciliation, Payroll etc.

Compensation: 3,000 - 4,000 QAR + Accommodation 

Visa limitations: Paksitani nationals only (Drop CVs at:

mqasimakbar@live.com

Senior SAP FICO Functional Consultant - Qatar

Senior SAP FICO Functional Consultant is urgently required by a prestigious client based in Qatar. 

Initially this is a 3 Month contract with possible extensions with an excellent package available including flights, accommodation, travel and insurance.

The ideal Candidate will have completed 5 end to end FICO implementations.

Please send your CV to:

Jordan@ateca.co.uk 

for immediate consideration